Seagate ST5000AS0011 Manual Do Utilizador

Seagate Archive HDD Product Manual, Rev. C

4 

* One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending

on operating environment and formatting.

* * During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power

to operational levels.

Wet bulb temperature (max)

30.0°C max (operating)

40.0°C max (nonoperating)

Altitude, operating

–61 m to 3048 m

(–200 ft to 10,000+ ft)

Altitude, non-operating 
(below mean sea level, max)

–61 m to 12,192 m

(–200 ft to 40,000+ ft)

Operational Shock (max @ 2 ms)

80 Gs

Non-Operational Shock (max @ 2 ms))

300 Gs

Vibration, operating

2–22 Hz:

 

0.25 Gs, Limited displacement

22–350 Hz:    0.50 Gs
350–500 Hz:  0.25 Gs

Vibration, non-operating

5Hz to 22Hz: 3.0 Gs

22Hz to 350Hz: 3.0 Gs

350Hz to 500Hz: 3.0 Gs

Drive acoustics, sound power (bels)

 Idle**

2.3   (typical)
2.5    (max)

 Performance seek

2.8   (typical)
3.0    (max)

Non-recoverable read errors

1 per 10

14 

bits read

Workload Rate Limit

Average rate of <180TB/year

The AFR specification for the drive assumes the I/O workload does not exceed the 

Average Annualized Workload Rate Limit of <180TB/year. Workloads exceeding the 

annualized rate may degrade the drive AFR and impact product reliability. The Average 

Annualized Workload Rate Limit is in units of TB per year, or TB per 8760 power on hours.

Workload Rate = TB transferred x (8760 / recorded power on hours).

Warranty

To determine the warranty for a specific drive, use a web browser to access the following 

web page: 

From this page, click on the “Check to see if the drive is under Warranty” link. Users will 

be asked to provide the drive serial number, model number (or part number) and country 

of purchase. The system will display the warranty information for the drive.

Load/Unload cycles (25°C, 50% rel. humidity)

300,000

Supports Hotplug operation per the
Serial ATA Rev. 3.2 specification

Yes