Sony R505 Manual

Press   to select Exit, then press   to select Get Default Values. The 
message “Load default values for all SETUP items” appears.

Press the Enter key. The Setup Confirmation window appears.

Select Yes, and press the Enter key.

Select Exit (Save Changes), then press the Enter key. The Setup 
Confirmation window appears.

Select Yes, then press the Enter key. The computer restarts.

❑

If you have connected a docking station with a floppy disk drive or an 
external floppy disk drive, make sure there is no floppy disk in the floppy 
disk drive (non-bootable). 

❑

If a non-bootable floppy disk is in the drive, proceed as follows:

Shut down the computer, then remove the floppy disk.

Restart the computer and confirm that the Windows operating system 
starts properly. 

❑

If Windows still does not start, follow the steps below to initialize the BIOS:

Remove any floppy disk from the floppy disk drive.

Shut down the computer.

Remove any peripheral devices connected to the computer.

Turn on the computer.

Press the F2 key when the Sony logo appears. The BIOS setup menu 
window appears.

Press the directional arrow keys to select the Exit menu.

Press the arrow keys to select Get Default Values, then press the Enter 
key. The message “Load default values for all SETUP items” appears. 

Press the Enter key, and select Yes.

✍

If this occurs on a regular basis, contact Sony Computing Support 
(http://www.sony.com/pcsupport).

Î

Ð