Fujitsu MPG3XXXAT Manual Do Utilizador
C141-E110-02EN
2 - 3
2.2
System Configuration
2.2.1
ATA interface
Figures 2.2 and 2.3 show the ATA interface system configuration. The drive has a 40-pin PC AT
interface connector and supports the PIO transfer till 16.6 MB/s (PIO mode 4), the DMA transfer
till 16.6 MB/s (Multiword DMA mode 2), the ultra DMA transfer till 66.6 MB/s (Ultra DMA
mode 4), and the ultra DMA transfer till 100 MB/s (Ultra DMA mode 5).
interface connector and supports the PIO transfer till 16.6 MB/s (PIO mode 4), the DMA transfer
till 16.6 MB/s (Multiword DMA mode 2), the ultra DMA transfer till 66.6 MB/s (Ultra DMA
mode 4), and the ultra DMA transfer till 100 MB/s (Ultra DMA mode 5).
2.2.2
1 drive connection
HA
(Host adaptor)
AT bus
(Host interface)
Host
Disk drive
ATA interface
Figure 2.2
1 drive system configuration
2.2.3
2 drives connection
HA
(Host adaptor)
AT bus
(Host interface)
Host
Disk drive #0
ATA interface
Disk drive #1
Note:
When the drive that is not conformed to ATA is connected to the disk drive is above
configuration, the operation is not guaranteed.
configuration, the operation is not guaranteed.
Figure 2.3
2 drives configuration