Yamaha CRW2100SX Manual Do Utilizador

The CRW2100SX drive’s rear panel features the following:

❋❋❋❋❋❋❋❋

1

Serial number sticker
This consists of 3 letters 
and 7 digits.  You may 
need to refer to this number 
when requesting User 
Support services. (P.11)

AC IN socket
Connect the included 
power cable here. (P.20)

TERMINATOR switch
This enables the drive’s 
built-in SCSI termination.  
Switch this to “ON” if your 
drive is the last device on 
the SCSI chain.  Otherwise, 
switch it to “OFF.” (P.13)

LINE OUT (L/R)
To listen to audio CDs with 
your drive, connect these to 
the line-level input (LINE IN) 
of your stereo equipment 
using a standard stereo 
phono cable (sold 
separately). 

CDR ID selector switch
The drive’s SCSI ID number 
is shown in the switch’s 
window.  Press the button 
above the window to 
decrement the SCSI ID 
number, or the button 
below the window to 
increment it. (P.12) 

SCSI connectors
Connect either of these to 
your computer’s SCSI card 
using the  SCSI cable.  The 
other connector can be 
used as a pass-through 
when daisy-chaining more 
SCSI devices to it.  It can 
be left vacant if your drive 
is the last device on the 
SCSI chain and is 
terminated. (P.20)

8