Yamaha CRW2200IX Manual Do Utilizador
Operation
22
Notes
• It may not be possible to open the disc tray while a disc is being read or written.
• Remove the disc only after the disc tray has opened fully. Otherwise, you risk damaging the
drive or the disc.
If the disc tray fails to open for some reason, such as a malfunction of the internal
spring-loaded mechanism or power outage, it can be opened manually.
spring-loaded mechanism or power outage, it can be opened manually.
You should attempt to eject a disc manually only as a last resort.
Malfunctions may occur if you do this too frequently.
Malfunctions may occur if you do this too frequently.
1
1
1
1 Shut down the computer and the CRW2200IX drive.
2
2
2
2 Find a pin-like tool with a diameter of 2 mm or less to fit through the
manual eject hole on the drive’s front panel.
Note
A straightened large paper clip is ideal for this purpose.
3
3
3
3 Push the tool gently into the manual eject hole until the spring-loaded
mechanism ejects the disc tray and disc.
4
4
4
4 Turn on the CRW2200IX drive to close the disc tray.
Ejecting a Disc in an Emergency
Manual eject hole
Paper clip
00GB-.book Page 22 Wednesday, June 27, 2001 7:24 PM