Wyse Technology Z90DE7p Manual Do Utilizador
2
Converting Wyse Z Class to ThinOS
This chapter includes the requirements and procedures you need to install and use Wyse
®
USB Firmware Tool
TM
to update your thin client to ThinOS firmware.
TIP: The purpose of the Wyse USB Firmware Tool is to configure a bootable USB key for
device firmware. In the following procedures, you will create two configured USB keys
containing the firmware contents that you need, and then boot from these configured USB
keys on the thin clients you want to convert to push the contents of the USB key onto
these target devices.
device firmware. In the following procedures, you will create two configured USB keys
containing the firmware contents that you need, and then boot from these configured USB
keys on the thin clients you want to convert to push the contents of the USB key onto
these target devices.
EXTREEMLY IMPORTANT: You must perform the steps to create and use the two
configured USB keys on each thin client as noted. You cannot completely convert one thin
client and then use the USB Firmware Tool to pull and push that image to your other thin
clients.
configured USB keys on each thin client as noted. You cannot completely convert one thin
client and then use the USB Firmware Tool to pull and push that image to your other thin
clients.
Requirements
•
Windows Server 2008 R2 SP1
•
Windows 7 Enterprise (32-bit and 64-bit)
•
Windows 7 Ultimate (32-bit and 64-bit)
•
2 USB Keys:
·
USB 2.0 only
•
Each USB key size should be 16 GB (see also "USB Keys - Troubleshooting Boot
Issues")
Issues")
CAUTION: During the USB key configuration process the USB keys will be reformatted.