Wyse Technology V90L/LE Manual Do Utilizador
4
6. Install the 1-GB or 2-GB flash module into the location of the original module making
sure to align the plastic tab of the module’s connector with the notch in the connector
on the board.
on the board.
Warning
The flash module may be susceptible to damage by Electro-Static Discharge
(ESD). All industry-standard cautions should be followed to avoid ESD.
(ESD). All industry-standard cautions should be followed to avoid ESD.
7. Replace the top cover and attach the vertical foot.
8. Reconnect the video display, keyboard, mouse, and power adapter to the thin client
before connecting to your electrical outlet (do not connect the thin client to the
network); then press the power button on the thin client to begin the installation
process (this will take a few minutes). During the installation process several windows
will open and close automatically.
network); then press the power button on the thin client to begin the installation
process (this will take a few minutes). During the installation process several windows
will open and close automatically.
Warning
Do not interrupt the installation process.
9. After the installation process is complete, the thin client will automatically restart to the
operating system. Connect the thin client to the network and then manually restart the
thin client.
thin client.
10.Proceed to “Verifying the Thin Client’s Operation.”