Microsoft DSE4XM1 Manual Do Utilizador

Página de 49
March 10, 2009
Dolphin Interconnect Solutions
17
www.dolphinics.com
6. Follow the procedure outlined in Chapter 3 for driver software installation. If you 
are prompted by the operating system for a driver, click Cancel.
7. Repeat the power-on procedure for any additional servers you may have connected 
to the DSE4XM.
Note:
If you are running a Windows operating system, Dolphin provides drivers to support the 
DXH510. These drivers are available on the Dolphin website at www.dolphinics.com/
support
2.5 Troubleshooting
Table 2–4 Troubleshooting Tips
Symptom
Tip
No Power to board
1) Check AC power cord for power.
2) Ensure rear power switch is turned on 
Both Uplink slot LEDs are off when con-
nected to server (both server and the 
DSE4XM must be powered)
1) Check cable connections
LED(s) are blinking when connected to 
server
Contact customer support
Memory cards do not appear in device 
manager or device list
Contact customer support
Host does not boot properly
Contact customer support
System hangs on boot
Contact customer support
Red Alarm LED is illuminated
TBD
Red Alarm LED is flashing
TBD