IBM 19K4260 Manual Do Utilizador
User’s guide
2-59
Note:
You can make similar settings in the Trust tab and the Bonding tab of the
Bluetooth Neighborhood Properties window (see “Bluetooth neighbor-
hood properties” on page 2-49). However, the settings made in those win-
dows are applied to all remote devices discovered; the settings in the Trust
tab of the Remote Device Properties window apply only to a particular
remote device.
Bluetooth Neighborhood Properties window (see “Bluetooth neighbor-
hood properties” on page 2-49). However, the settings made in those win-
dows are applied to all remote devices discovered; the settings in the Trust
tab of the Remote Device Properties window apply only to a particular
remote device.
LED operation
The green light-emitting diode (LED) indicator on the Bluetooth PC card from
IBM is lit for 10 seconds after you turn on your computer, and flashes when the
Bluetooth unit is communicating with a remote Bluetooth unit.
IBM is lit for 10 seconds after you turn on your computer, and flashes when the
Bluetooth unit is communicating with a remote Bluetooth unit.
Bluetooth diagnostics
After you are finished installing the Bluetooth PC Card and the Bluetooth Soft-
ware Suite from IBM, check that the PC Card has been installed properly. This is
done by performing a loopback test. To perform a loopback test, do the following:
ware Suite from IBM, check that the PC Card has been installed properly. This is
done by performing a loopback test. To perform a loopback test, do the following:
1. Click Start, then click Settings, then click Control Panel.
2. Double-click Bluetooth Configuration Tool.
3. Click the Diagnostics tab.