Cisco Systems 1550 Manual Do Utilizador
3-5
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 3 Troubleshooting
Verifying Controller Association
Verifying Controller Association
To verify that your access point is associated to the controller, follow these steps:
Step 1
Log into your controller web interface using a web browser.
You can also use the controller CLI show ap summary command from the controller console port.
Step 2
Click Wireless, and verify that your access point MAC address is listed under Ethernet MAC.
Step 3
Log out of the controller, and close your web browser.
Table 3-1
Access Point LED Signals
LED
Color
1, 2
1.
If all LEDs off, the access point has no power.
2.
When the access point power supply is initially turned on, all LEDs are amber.
Meaning
Status
Black
No power applied or LED off.
Steady green
Access point is operational.
Blinking green
Download or upgrade of Cisco IOS image file in progress.
Steady amber
Mesh neighbor access point discovery in progress.
Blinking amber
Mesh authentication in progress.
Blinking red / green /amber
CAPWAP discovery in progress.
Steady red
Firmware failure. Contact your support organization for assistance.
Uplink
Black
All network ports down or LED off.
Steady green
Uplink port is operational (cable, fiber optic, or Ethernet).
RF-1
Black
Radio turned off or LED off.
Steady green
Radio is operational; network is good.
Steady red
Firmware failure. Contact your support organization for assistance.
RF-2
Black
Radio is turned off or LED off.
Steady green
Radio is operational; network is good.
Steady red
Firmware failure. Contact your support organization for assistance.