Gigabyte GA-7vkml Manual Do Utilizador
- 4 -
GA-7VKML Series Motherboard
English
Item Checklist
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, y ou should follow some precautions whenever
you work on your computer.
protect them against damage from static electricity, y ou should follow some precautions whenever
you work on your computer.
1.
Unplug your computer when working on the inside.
2.
Use a grounded w rist strap before handling computer components. If you do not have
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
one, touch both of your hands to a safely grounded object or to a metal object, such as
the power supply case.
3.
Hold components by the edges and try not touch the IC chips, leads or connectors, or
other components.
other components.
4.
Place components on a grounded antistatic pad or on the bag that came with the
components whenever the components are separated from the system.
components whenever the components are separated from the system.
5.
Ensure that the ATX pow er supply is switched off before you plug in or remove the ATX
pow er connector on the motherboard.
pow er connector on the motherboard.
If the motherboard has mounting holes, but they don’t line up with the holes on the base and
there are no slots to attach the spacers, do not become alarmed y ou can still attach the spacers to
the mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to
cut off, so be careful of your hands). In this way y ou can still attach the motherboard to the base
without worrying about short circuits. Sometimes you may need to use the plastic springs to isolate
the screw from the motherboard PCB surface, because the circuit wire may be near by the hole. Be
careful, don’t let the screw contact any printed circuit write or parts on the PC B that are near the
fix ing hole, otherwise it may damage the board or cause board malfunctioning.
the mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to
cut off, so be careful of your hands). In this way y ou can still attach the motherboard to the base
without worrying about short circuits. Sometimes you may need to use the plastic springs to isolate
the screw from the motherboard PCB surface, because the circuit wire may be near by the hole. Be
careful, don’t let the screw contact any printed circuit write or parts on the PC B that are near the
fix ing hole, otherwise it may damage the board or cause board malfunctioning.
Installing the motherboard to the chassis…
WARNING!
þ The GA-7VKML series motherboard
o 2 Port USB Cable x 1
þ IDE cable x 1/ Floppy cable x 1
o 4 Port USB Cable x 1
þ CD for motherboard driver & utility (VUCD)
o SPDIF KIT x 1(SPD-KIT)
þ GA-7VKML series user’s manual
o IEEE 1394 Cable x1
þ I/O Shield
o Center/Subwoofer Cable x1
o Quick PC Installation Guide
(SURROUND-KIT)
o RAID Manual
o Motherboard Settings Label