Gigabyte GA-7VT600 Manual Do Utilizador
BIOS Setup
- 45 -
English
)
)
)
)
) PME Event Wake up
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state.
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disabled
Disabled PME Event Wake up function.
Enabled
Enabled PME Event Wake up function. (Default Value)
)
)
)
)
) ModemRingOn/WakeOnLAN
(When AC Back Function set to [Soft-Off])
You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake
up" when the M/B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake up".
An incoming call via modem awakes the system from its soft-off mode. When set at Enabled, an input
signal comes from the other client.
An incoming call via modem awakes the system from its soft-off mode. When set at Enabled, an input
signal comes from the other client.
Server on the LAN awaks the system from a soft off state if connected over LAN.
Disabled
Disabled Modem Ring On / Wake On LAN function.
Enabled
Enabled Modem Ring On / Wake On LAN function. (Default Value)
)
)
)
)
) Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.
Disabled
Disable this function. (Default Value)
Enabled
Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Date (of Month) Alarm :
Everyday, 1~31
Time (hh: mm: ss) Alarm :
(0~23) : (0~59) : (0~59)