IBM CDI5UG1107 Manual Do Utilizador

126

IBM Sterling Connect:Direct for i5/OS User’s Guide

frequency indicates how often the Process runs. You can determine the frequency by entering one of
the following selections: *NONE, *DAY, or *WEEK.

If you enter *NONE, the Process is run only once automatically. *DAY indicates that the Process is
run every day at the same time after the first scheduled time. *WEEK releases the Process weekly at
the same time and day of the week as the first execution.

TRACEOPT

specifies the trace bits that define functions to be traced by Sterling Connect:Direct for i5/OS. The
following are valid options:

L enables the main line logic trace for all components.

S enables the Process step logic trace.

F enables the file handler trace.

C enables the communications logic trace.

X enables the XDR trace.

K enables the KQV logic trace.

D enables the all-purpose data dump.

H enables the FMH dump.

V enables the XDR dump.

W enables the communications dump.

P enables the CIPC dump.

*NONE turns off all traces.

*ALL enables all product traces.(L, S, F, C, X, K, D, H, V, W and P)

*EXT enables all product traces plus two system traces (TRCICF and TRCJOB).

*COMMON enables the communications traces. (L, S, F, C, and H)

*INITPARMS indicates the traces specified in the initialization parameters.

*CURRENT selects the trace bits that the session manager is currently using.

Command Trace Options
L,S,F,C,X,K,D,H,V,P|*ALL|*EXT|*COMMON| *NONE)

specifies the trace bits that define functions to be traced for this command but not for the Process it
runs. The following are valid options: