Gigabyte GA-8GEM667 Manual Do Utilizador

Technical Reference

- 59 -

STEP 6: Load BIOS defaults.

Normally the system redetects all devices after BIOS has been upgraded.  Therefore, we

highly recommend reloading the BIOS defaults after BIOS has been upgraded.  This

important step resets everything after the flash.

(1) Take out the floppy diskette from floppy drive, and then restart the system.  The boot up

screen will indicate your motherboard model and current BIOS version.

7VTX F4
Check System Health OK
AMD-Athlon(tm)Processor-900MHz
Checking NVRAM...
262144KB

Wait...
Press F1 to enter Dual BIOS Utility. Press ESC to quit
Press any key to contiune

( C ) American Megatrends Inc.,
63-0001-001199-00101111-071595-VIA_K7-GA7VTX1-F

American     Release:09/16/99
Megatrends  AMIBIOS (C) 1999 American Megatrend

(2) Don't forget to press <DEL> key to enter BIOS setup again when system is boot up. Use the

arrows to highlight the item "LOAD SETUP DEFAULTS" then press "Enter". System will ask

"Load Setup Defaults (Y/N)?"  Press "Y" and "Enter" keys to confirm.

AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b

(C) 2001 American Megatrends, Inc. All Rights Reserved

STANDARD CMOS SETUP

INTEGRATED PERIPHERALS

BIOS FEATURES SETUP

HARDWARE MONITOR & MISC SETUP

CHIPSET FEATURES SETUP

SUPERVISOR PASSWORD

POWER MANAGEMENT SETUP

USER PASSWORD

PNP / PCI CONFIGURATION

IDE HDD AUTO DETECTION

LOAD BIOS DEFAULTS

SAVE & EXIT SETUP

LOAD SETUP DEFAULTS

EXIT WITHOUT SAVING

ESC: Quit

h i f g  

: Select Item

(Shift)F2 : Change Color

F5: Old Values

F6:  Load BIOS Defaults

      F7: Load Setup Defaults           F10:Save & Exit

Load Setup Defaults

Load Setup Defaults? (Y/N)?N