Gigabyte GZ-FSCA1-AN Manual Do Utilizador

 

14

 

 

 

 
The 3D AURORA provides built-in bays to accommodate up to 5 hard disc drives (after removal of 
the tool enclosure). The built-in HDD requires securing runners, which can be found in the black 

tool enclosure. 
Required tool: Securing runners x 10 in the tool enclosure and power extension cables x 2. 
 

 

4-7-3  Refer to the installation order illustrated in the left 

figure and secure the 3.5” floppy disc drive by 

controlling the latch. (reverse steps for disassembly) 

4-7-4 Installation 

completed. 

 

4-8-1  Use the runners installed on both sides of the HDD 

evenly and slide the HDD into the hard disk drive 

bay. 

4-8-2  For installation of the fourth and fifth HDDs, loosen 

the tool enclosure, and then install the HDD in 

accordance with Step 4-8-1. 

4-8-3  In case the length of power cable is not sufficient for 

installation of the bottom HDD, it is possible to use 
the power extension cable inside the tool enclosure, 
depending on the HDD with 4-pin or SATA power 
cable.