Fujitsu J2X1-7611-03ENZ0 Manual Do Utilizador

Key

Description

Default value

A number of days cannot be specified with this
method.

*1: Changes to this setting are enabled by executing the Change periodic log schedule settings command after changing the
settings file.
*2: If periodic_log_schedule_type is DAILY, the periodic_log_schedule_day value will be ignored.

An example of setting the operational settings file is shown below:

# delete setting of meteringlog database 

# YYYY-MM-DD

# ex. 3 months ago     0000-03-00

retention_period=0000-03-00

# schedule of periodlog insert

periodic_log_use=yes

periodic_log_schedule_time=00:00

periodic_log_schedule_type=DAILY

periodic_log_schedule_day=

3.

If an item other than retention_period has been changed, execute the Change periodic log schedule settings command.
Refer to "10.1 ctchg_chgschedule (Change Periodic Log Schedule Settings)" in the "Reference Guide (Command/XML) CE" for
information on the Change periodic log schedule settings command.

 

 Note

-

Specify either the default value (3 months) or a period longer than the default value for retention_period.

-

Do not change the values for the following keys from the default:

-

periodic_log_use

-

periodic_log_schedule_time

-

periodic_log_schedule_type

-

periodic_log_schedule_day

This section describes how to change the settings for the usage charge calculator function.

The procedure for changing the settings is as follows:

1.

Open the following operating environment file:

[Windows Manager]

Installation_folder\RCXCTMG\Charging\conf\accounting.properties

[Linux Manager]

/etc/opt/FJSVctchg/conf/accounting.properties

2.

Set the following items in the operating environment file:

 

- 38 -