AMCC 9650SE Manual Do Utilizador
Controller Object Commands
www.3ware.com
51
3
Use the /cx add rebuild command to create the rebuild schedule slots you
want (described above.)
want (described above.)
4
Use the /cx set rebuild=enable command to enable the schedule (this
enables all rebuild schedule slots). (For details, see page 53.)
enables all rebuild schedule slots). (For details, see page 53.)
/c
x
add verify=
ddd:hh:duration
This command adds a new background verify task to be executed on the day
ddd (where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at hour hh
(range 0 .. 23), for a duration of duration (range 1 .. 24) hours. A maximum of
seven verify tasks can be scheduled. This command will fail if no (empty)
task slot is available.
ddd (where ddd is Sun, Mon, Tue, Wed, Thu, Fri, and Sat), at hour hh
(range 0 .. 23), for a duration of duration (range 1 .. 24) hours. A maximum of
seven verify tasks can be scheduled. This command will fail if no (empty)
task slot is available.
Example:
//localhost> /c1 add verify=Sun:16:3
adds a verify background task schedule to be executed on Sundays at 16
hours (4:00 PM) for a duration of 3 hours.
hours (4:00 PM) for a duration of 3 hours.
Setting Up a Verify Schedule
Setting up a verify schedule requires several steps, and several different CLI
commands in addition to /cx add verify.
commands in addition to /cx add verify.
To set up the verify schedule you want to use, follow this
process:
process:
1
Use the /cx show verify command to display the current schedule for
verify tasks. (For details, see page 48.)
verify tasks. (For details, see page 48.)
2
If any of the scheduled tasks do not match your desired schedule, use
the /cx del verify command to remove them. (For details, see page 53.)
the /cx del verify command to remove them. (For details, see page 53.)
3
Use the /cx add verify command to create the verify schedule slots you
want (described above.)
want (described above.)
4
Use the /cx set verify=enable command to enable the schedule (this
enables all rebuild schedule slots). (For details, see page 54.)
enables all rebuild schedule slots). (For details, see page 54.)
5
Use the /cx/ux set autoverify=on command to turn on autoverify for each
unit you want to follow the schedule. (For details, see page 68.)
unit you want to follow the schedule. (For details, see page 68.)
Warning:
If all time slots are removed, be sure to also disable the schedule.
Otherwise the applicable background task will never occur.