AMCC 720-0138-00 Manual Do Utilizador

Scheduling Background Tasks

79

3

In the Schedule Rebuild Tasks section, select the appropriate setting: 

 or 

. 

The illustration below shows this setting for the rebuild task schedule.

                                      

Removing a Task Schedule

By default, daily task schedules are defined, each starting at 12:00 am and 
running for 24 hours.

A maximum of seven schedules can be defined. When seven schedules are 
shown for any of the tasks, you must remove a schedule before you can add 
another. 

1

Choose 

 from the menu bar.

The Scheduling page appears, showing the schedule for Rebuild/Migrate 
Tasks.

2

To view Verify Tasks or Self-test Tasks, select it from the drop-down list 
at the top of the page.

3

Select the checkbox next to the schedule(s) you want to remove.

4

Click the 

 button. 

The page refreshes, and the selected schedule(s) are removed. You can 
now add another schedule.

Adding a New Task Schedule Slot

When you add a rebuild/migrate or verify task schedule, you specify the day 
of the week, time, and duration for the task. For self-test schedules, you 
specify day and time, but not duration. (Duration is not required for self-tests.)

Depending on the schedule and system workload, background tasks may 
require more than one scheduled duration to complete. 

 

Self-test schedules cannot be turned off in this way. To disable self-tests you 

must either remove all schedule times, or uncheck the tests listed in the

 

 

column. For more information, see “Selecting Self-tests to be Performed” on 
page 80