APC AP7900 Manual Do Utilizador
®
USER’S GUIDE
Switched Rack PDU
11
Item
Function
Load Indicator LED
Input Selector
On 3-phase models, press the input selector to
monitor the current of the next phase or bank.
monitor the current of the next phase or bank.
For either 1- or 3-phase units, press and hold the
input selector to display the IP address of the Rack
PDU or to invert the display. At five seconds, the IP
address is displayed; at ten seconds the displayed
numbers invert.
input selector to display the IP address of the Rack
PDU or to invert the display. At five seconds, the IP
address is displayed; at ten seconds the displayed
numbers invert.
10/100 Base-T Connector
Connects the Rack PDU to the network.
Status LED
See
Link-RX/TX LED
See
.
RJ-12 Serial Port
Connects the Rack PDU to a terminal emulator
program for local access to the control console.
(Use the supplied serial cable 940-0144.)
program for local access to the control console.
(Use the supplied serial cable 940-0144.)