APC AP7900 Manual Do Utilizador

the correct host key was uploaded by verifying that the fingerprints 
displayed here match the SSH fingerprints on the Rack PDU, as 
displayed by your SSH client program.

7. The last screen verifies that the host key has been created and 

instructs you on the next task, to load the host key to the Switched 
Rack PDU. It displays the location and name of the host key, which has 
a 

 file extension.

Perform these steps:

1. On the 

 menu of the Web interface of the Switched Rack 

PDU, select the 

 option.

2. In the 

section of the page, browse to the host 

key, the 

 file you created in the procedure 

. 

(The default location is 

.)

3. On the 

 section of the page, note the 

fingerprint for the version (or versions) of SSH you are using. Then log 
on to the Rack PDU through your SSH client program, and verify that 
the correct host key was uploaded by verifying that these fingerprints 
match the fingerprints that the client program displays.

Alternatively, you can use FTP or Secure CoPy (SCP) to transfer 
the host key file to the Rack PDU. If you use FTP or SCP for the 
transfer, you must specify the correct location, 

, on the Rack 

PDU. For SCP, the command to transfer a host key named 

 to a Rack PDU with an IP address of 156.205.6.185 

would be:

scp cert.p15 apc@156.205.6.185:\sec\hostkey.p15