APC AP7900 Manual Do Utilizador

You can use a local computer that connects to the Rack PDU through the 
serial port on the front panel of the unit.

1. Select a serial port at the local computer, and disable any service 

which uses that port.

2. Use the supplied serial cable (940-0144) to connect the selected port 

to the serial port on the front panel of the Rack PDU. 

3. Run a terminal program (such as HyperTerminal) and configure the 

selected port for 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow 
control. Save the changes.

4. Press 

E

NTER

, repeatedly if necessary, to display the 

 

prompt.