APC AP7900 Manual Do Utilizador

To set up multiple global outlet groups that link to outlet groups on other 
Switched Rack PDUs:

1. From the 

 menu in the Web interface, select 

.

2. Make sure outlet groups are enabled and that the Multicast parameters 

(name and IP address) are the same for all Rack PDUs to be linked.

3. Click 

.

4. For each global outlet group you want to create, select an outlet by 

clicking on its check-box. Then click 

. For example, select five 

outlets to create five outlet groups, each consisting of one global outlet.

5. To add outlets to any of the global outlet groups you created, see 

1. From the 

 menu in the Web interface, select 

.

2. Under 

, click on the number or name of the 

outlet group to edit or delete.

3. When editing an outlet group you can do any of the following:

– Rename the outlet group.
– Add or remove outlets by clicking the check-boxes to mark or 

unmark them.

4. To delete the outlet group, click 

.

See 

.

You cannot remove an outlet from an outlet group that 
contains only two outlets unless the remaining outlet is a 
global outlet.