APC AP7900 Manual Do Utilizador
®
USER’S GUIDE
Switched Rack PDU
2
• Four levels of user access accounts—Administrator, Device Manager,
Read Only User, and Outlet User
• Event and data logging—the event log is accessible by Telnet, Secure
CoPy (SCP), File Transfer Protocol (FTP), serial connection, or Web
browser (using HTTPS access with SSL, or using HTTP access). The
data log is accessible by Web Browser, SCP, and FTP
browser (using HTTPS access with SSL, or using HTTP access). The
data log is accessible by Web Browser, SCP, and FTP
• E-mail notifications for Rack PDU and system events
• SNMP traps, Syslog messages, and e-mail notifications based on the
• SNMP traps, Syslog messages, and e-mail notifications based on the
severity level of Rack PDU and system events
• A selection of security protocols for authentication and encryption
Initial setup
You must define the following three TCP/IP settings for the Switched Rack
PDU before it can operate on the network:
PDU before it can operate on the network:
• IP address of the Rack PDU
• Subnet mask
• IP address of the default gateway
• Subnet mask
• IP address of the default gateway
The Rack PDU does not provide power protection. Therefore,
APC does not recommend plugging a unit directly into any
unprotected power source, such as a wall outlet.
APC does not recommend plugging a unit directly into any
unprotected power source, such as a wall outlet.
See also
To configure the TCP/IP settings, see the Installation and Quick
Start manual provided as a PDF file on the Utility CD that came
with your Rack PDU and as a printed manual.
Start manual provided as a PDF file on the Utility CD that came
with your Rack PDU and as a printed manual.