APC AP7900 Manual Do Utilizador

The Web interface and control console both have options that allow you to 
define up to four trap receivers and up to four e-mail addresses to be used 
when an event occurs that has SNMP traps or e-mail enabled. 

To access the 

 settings that allow you to define which NMSs 

will receive traps:

• In the Web interface, use the 

 option in the 

 menu.

•

In the control console, use the 

 option in the 

 menu.

See 

Community Name

This setting defines the password (maximum of 15 
characters) used when traps are sent to the NMS 
identified by the 

setting.

Receiver NMS IP/Domain 
Name

Identifies by IP address or domain name the NMS that will 
receive traps. If this setting is 

 (the default value), 

traps will not be sent to any NMS.

Generation (Web interface)

Trap Generation (control 
console)

Enables (by default) or disables the sending of any traps 
to the NMS identified by the 

setting.

Authentication Traps

Enables or disables the sending of authentication traps to 
the NMS identified by the 

setting.