APC AP7900 Manual Do Utilizador
®
USER’S GUIDE
Switched Rack PDU
84
SNMP
An
Access
option (the
Settings
option in the control console) enables (by
default) or disables SNMP. When SNMP is enabled, the
Access Control
settings allow you to control how each of the four available SNMP channels
is used.
is used.
SSH Host Key Fingerprint
SSH v1:
Displays the SSH version 1 fingerprint for the host key. The fingerprint is
a unique identifier to further authenticate the host key. In the control
console, choose
a unique identifier to further authenticate the host key. In the control
console, choose
Advanced SSH Configuration
and then
Host Key
Information
to display the fingerprint.
SSH v2:
Displays the SSH version 2 fingerprint for the host key. The fingerprint is
a unique identifier to further authenticate the host key. In the control
console, choose
a unique identifier to further authenticate the host key. In the control
console, choose
Advanced SSH Configuration
and then
Host Key
Information
to display the fingerprint.
Option
Description
To define up to four NMSs to serve as trap receivers, see
See also
To use SNMP to manage a Switched Rack PDU, see the
PowerNet
PowerNet
®
SNMP Management Information Base (MIB)
Reference Guide (.\doc\en\mibguide.pdf) on the APC Rack
PDU Utility CD that came with your Rack PDU.
PDU Utility CD that came with your Rack PDU.
Setting
Definition
Community
Name
Name
Defines the password (maximum of 15 characters) that an NMS defined
by the
by the
NMS IP/Domain Name
setting uses to access the channel.