Nvidia N61V Manual Do Utilizador

- 2 -

 nVIDIA N61P/N61S/N61V                                                                             User's /Manual

         OnChip IDE Channel 0

         The mainboard chipset contains a PCI IDE interface with support for two IDE channels.           

         Select “Enabled” to activate the first and/or second IDE interface. Select “Disabled” to 

         deactivate an interface if you are going to install a primary and/or secondary add-in IDE 

         interface.

         Primary Master/Slave PIO

         Each IDE channel supports a master device and a slave device. These four items let you

         assign the kind of PIO (Programmed Input/Output) were used by the IDE devices. 

          Choose Auto to let the system auto detect which PIO mode is best, or select a PIO mode 

          from 0-4.

         Primary Master/Slave UDMA

         Each IDE channel supports a master device and a slave device. This mainboard supports            

         UltraDMA technology, which provides faster access to IDE devices. If you install a device 

         that supports UltraDMA, change the appropriate item on this list to Auto. You may have 

         to install the UltraDMA driver supplied with this mainboard in order to use an UltraDMA           

         device.

         IDE DMA transfer access

         This item allows you to enable the transfer access of the IDE DMA then burst onto the

         PCI bus and nonburstable transactions do not.

         Serial-ATA Controller

Available options: 

[Disabled] [Enabled]

         IDE Prefetch Mode

         The “ onboard” IDE drive interfaces supports IDE prefetch function for faster drive          

         access. If the interface on your drive does not support prefetching, or if you install a 

         primary and/or secondary add-in IDE interface, set this option to “Disabled”.
        • Back to Integrated Peripherals Setup Menu
      

►  

         Click <Enter> key to enter its submenu:

         RAID Enable

         Available options: [Disabled] [Enabled]      

         SATA 1/2 Pri-Master/Primary/Secondary/Primary RAID

         This option allows you to enable or disable SATA Primary/Secondary RAID.

         This is configurable only when “RAID Enable” is set to “Enabled”.
        • Back to Integrated Peripherals Setup Menu
     ・

         This option enables or disables the LAN controller.

 Phoenix - AwardBIOS CMOS Setup Utility

RAID Config

    RAID Enable

  x SATA 1 Pri-Master    RAID
  x SATA 1 Secondary     RAID
  x SATA 2 Primary       RAID
  x SATA 2 Secondary     RAID

    

[

Disabled

]

 Disabled
 Disabled
 Disabled
 Disabled

Item Help

 Menu Level  

►►

↑

↓

→←

:Move Enter:Select   +/-/PU/PD:Value   F10:Save    ESC:Exit   F1:General Help

F5: Previous Values    F6: Fail-Safe Defaults    F7: Optimized Defaults

Disabled