Nu Technology cPCI-6760DK/P5 Manual Do Utilizador

• 

Intel 440BX AGPset 

• 

Intel 82443BX and 82371EB(PIIX4E) 

• 

BIOS write protection, provide anti-virus capability 

• 

On-board Ethernet disable selectable 

• 

DMI BIOS Support: Desktop Management Interface (DMI) allows users to 

download system hardware-level information such as CPU type, CPU 
speed, internal/external frequencies and memory size. 

• 

Supports Intel pre-boot execution environment (PXE) for boot from LAN 

• 

Remote Console: setup console redirection to serial ports (terminal 

mode) with CMOS setup access 

Note:  Due to the BIOS segment limitation, enable the remote console 

function may occupy the same memory space for other 
ROM-mapping add-on or boot-up devices such like Pre-boot 
Agent of Ethernet Boot ROM, SCSI Boot ROM or add-on EIDE 
Boot ROM.  It is recommended to enable only one ROM-mapping 
add-on or boot-up device when enable the remote console 
function. 

• 

Two 144-pin SO-DIMM sockets, Max. 512MB PC-100 un-buffered 

SDRAM 

• 

Pre-installed 64MB PC-100 SD-RAM on SO-DIMM socket 

• 

Bus Master IDE controller supports two EIDE interfaces by DB-6760J3  

(40-pin) and onboard 44 pin IDE connector for up to four IDE devices, 
including HDD and  ATAPI CD-ROM  drives. 44-pin secondary EIDE 
connector supports on-board 2.5” notebook size HDD or Flash2000

TM

 

flash disk. 

• 

One CompactFlash type-II socket on removable daughter board for front 

CPU module. 

Note:  CompactFlash daughter board (DB-6760CF) occupies the same 

space of 2.5” ATA HDD.  cPCI-6760DK/P5 supports on-module 
one 2.5” ATA HDD or one CompactFlash socket, but not both.