Samsung BN68-01416A-00 Manual Do Utilizador

Installing Batteries in the Remote Control
1  Lift the cover at the back of the remote control upward as 

shown in the figure.

  Install two AAA size batteries.

➢



Make sure to match the “

+” and “–” ends of the 

batteries with the diagram inside the compartment.



Do not mix battery types, i.e. alkaline and 

manganese.

  Close the cover as shown in the figure.

➢

Remove the batteries and store them in a cool and dry 

place if you won’t be using the remote control for a long time. The remote control can be used up 

to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)

➢

If the remote control doesn’t work! Check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power cut, or is the power cord unplugged?

5. Is there a special fluorescent light or a neon sign nearby?

The main lead is attached to the rear of the television.
1  Plug the main lead into an appropriate socket.

➢

The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.

  Press the   (Power) button (On/Off) on the front of the television or press the POWER button on the 

remote control to switch the television on. The programme that you were watching last is re-selected 

automatically. If you have not yet stored any channels, no clear picture appears. Refer to “Storing 

Channels Automatically” on page 13 or “Storing Channels Manually” on page 14.

➢

If the television is initially powered on, several basic customer settings proceed automatically. 

Refer to “Plug & Play Feature” on page 10.

  To switch the television off, press the   (Power) button (On/Off) on the front of the television or press 

the 

POWER button on the remote control.

4  To switch the TV on, press the   (Power) button (On/Off) on the front of the TV or press the POWER 

button or number buttons on the remote control.

1  Press the MENU button.  

The main menu is displayed on the screen. 

Its left side has six icons: 

Input, and Digital Menu.

  Press the ▲ or ▼ button to select one of the icons. 

Press the 

ENTER button to access the icon’s sub-menu.

  Press the ▲ or ▼ button to move to items in the menu. 

Press the 

ENTER button to enter items in the menu.

4  Press the ▲/▼/◄/► button to change the selected items. 

Press the 

RETURN button to return to the previous menu.

5  Press the EXIT button to exit from the menu.

 ►

 ►

 ►

 ►

BN68-01416A-Eng.indb   9

2008-2-29   17:20:14