Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-715
EXT-DEV ADMIN? Y (External Device Alarm)
10
System Technician-Demanded Tests:
Descriptions and Error Codes
Descriptions and Error Codes
Always investigate tests in the order presented in the table below when
inspecting errors in the system. By clearing error codes associated with the
inspecting errors in the system. By clearing error codes associated with the
Battery & Battery Charger Query Test,
you may also clear errors generated from
other tests in the testing sequence.
External Device Alarm Test (#120)
The External Device Alarm Test requests the state of the External Device Alarm
from a Maintenance circuit pack and reports the results. The test has no effect on
the external device itself.
from a Maintenance circuit pack and reports the results. The test has no effect on
the external device itself.
1.
D = Destructive; ND = Nondestructive
Order of Investigation
Short
Test
Sequence
Long
Test
Sequence
D/ND
1
External Device Alarm Test (MAJOR
port) (#120)
port) (#120)
X
X
ND
External Device Alarm Test (MINOR
port) (#120)
port) (#120)
X
X
ND
External Device Alarm Test (WARNING
port) (#120)
port) (#120)
X
X
ND
Table 10-203.
TEST #120 External Device Alarm Test
Error
Code
Test
Result
Description/ Recommendation
1000
ABORT
System resources required to run this test are not
available.
available.
1. Retry the command at 1 minute intervals a maximum
of 5 time.
2. If the test continues to abort, escalate the problem.
1035
ABORT
The Expansion Port Network containing this equipment
is not available
is not available
Look for and resolve all Expansion Port Network
problems with this cabinet.
problems with this cabinet.
Continued on next page