Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-913
MODEM-PT (Modem Pool Port)
10
Hardware Error Log Entries and Test to Clear
Values
Values
Note:
a. This error type indicates that the circuit pack has been removed or has
been insane for more than 21 minutes. To clear the error, reinsert or
replace the circuit pack.
replace the circuit pack.
System Technician-Demanded Tests:
Descriptions and Error Codes
Descriptions and Error Codes
Always investigate tests in the order presented in the table below when
inspecting errors in the system. By clearing error codes associated with the
inspecting errors in the system. By clearing error codes associated with the
Modem Pool Conference Test,
for example, you may also clear errors generated
from other tests in the testing sequence. The tests in this section do not apply to
Combined Modem Pool conversion resources. The standard Digital Line and/or
Analog Line port tests are run on the ports associated with the Combined Modem
Pool. The test descriptions for those maintenance objects (MOs) should be
consulted when repairing Combined Modem Pool arrangements.
Combined Modem Pool conversion resources. The standard Digital Line and/or
Analog Line port tests are run on the ports associated with the Combined Modem
Pool. The test descriptions for those maintenance objects (MOs) should be
consulted when repairing Combined Modem Pool arrangements.
For example, you may also clear errors generated from other tests in the testing
sequence. The tests in this section do not apply to Combined Modem Pool
conversion resources. The standard Digital Line and/or Analog Line port tests
are run on the ports associated with the Combined Modem Pool. The test
sequence. The tests in this section do not apply to Combined Modem Pool
conversion resources. The standard Digital Line and/or Analog Line port tests
are run on the ports associated with the Combined Modem Pool. The test
1.
Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the appropriate
test description and follow the recommended procedures.
test description and follow the recommended procedures.
Modem Pool Port Error Log Entries
Error
Type
Type
Aux
Data
Associated Test
Alarm
Level
On/Off
Board
Test to Clear Value
0
1
0
Any
Any
Any
test port PCSSpp sh r 1
18
0
busyout PCSS
WARNING
OFF
release port PCSSpp
130 (a)
None
WARNING
ON
test port PCSSpp sh
257
Conversion
Resource Loop
Test (#98)
Resource Loop
Test (#98)
MINOR
ON
test port PCSSpp sh r 3
513
Modem
Conference
Test(#97)
Conference
Test(#97)
MINOR
ON
test port PCSSpp l r 3
769
Modem NPE
Crosstalk Test
(#96)
Crosstalk Test
(#96)
MINOR
ON
test port PCSSpp l r 3