Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1191
PROCR (TN790 RISC Processor Circuit Pack)
10
f. The Address Matcher Test failed during a reset level 4 or 5 initialization.
This is not alarmed because the address matcher is only used for high
level debugging. Replace the processor circuit pack if the Address
Matcher is needed for troubleshooting.
level debugging. Replace the processor circuit pack if the Address
Matcher is needed for troubleshooting.
System Technician-Demanded Tests:
Descriptions and Error Codes
Descriptions and Error Codes
Always investigate tests in the order presented in the table below. By clearing
error codes associated with the
error codes associated with the
Processor Bus Time-out Exception Test,
for
example, you may also clear errors generated from other tests in the testing
sequence.
sequence.
1.
D = Destructive; ND = Nondestructive
Order of Investigation
Short Test
Sequence
Long Test
Sequence
D/ND
1
Processor Cache Test (#895)
X
ND
Processor Cache Audit (#896)
X
X
ND
Processor Bus Time-out Exception Test (#82)
X
X
ND
Processor BOOTPROM Checksum Test (#80)
X
X
ND
Processor Write Buffer Test (#900)
X
X
ND
Memory Burst Read Test (#908)(a)
X
X
ND
Read All Memory Test (#85)(a)
X
ND
Memory Parity Error Detection Test (#87)(a)
X
X
ND
Flash Memory Checksum Test (#86)(a)
X
ND
Memory Functional Test (#332) (a) (b)
X
D
MTP Outpulse Relay Test (#102) (c)
X
X
ND
MTP External Modem Present Test (#230) (c)
X
X
ND
MTP Analog Loop Around Test (#103) (c)
X
X
ND
MTP Sanity Handshake Test (#106) (c)
X
X
ND
MTP SAT Loop Around Test (#228) (c)
X
X
ND
MTP Aux Loop Around Test (#229) (c)
X
X
ND
MTP Reset Test (#101) (c)
X
D
MTP Dual Port Ram Test (#104) (c)
X
D
Continued on next page