Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1645
VC-DSPPT
10
VC-DSP Port DSP Loopback Test (#1105)
This test is destructive.
This test verifies the connectivity of a VC-DSPPT across the TDM bus. It aborts if
calls associated with the port are in progress. Failure of this test indicates an
on-board fault associated with the port hardware on the circuit pack.
calls associated with the port are in progress. Failure of this test indicates an
on-board fault associated with the port hardware on the circuit pack.
PASS
The VC DSP Port Local TDM Loop Around Test passed.
Table 10-481.
TEST #1104 VC DSPPT Local
TDM Loopback Test —
Continued
Error
Code
Code
Test
Result
Description/Recommendation
Continued on next page