Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-42

busyout tdm 

If the port network on which the desired TDM bus resides is unavailable, the 
following message will be displayed:

 EPN is not available

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

 ’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

 Command resources busy; Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

 All maintenance resources busy; try again later

For the following output example, assume that the command that was entered is 
"busyout tdm port-network 1 bus a."

Port

The port address is displayed as PN followed by the port network 
number and bus (A or B) associated with the TDM bus.

Alt. Name

Not applicable.

Maintenance Name

The type of maintenance object that is being busied out. In this 
case it is always TDM-BUS.

Result

The result of the busyout -"PASS," "ABORT," "FAIL".

Error Code

A system-generated number that tells why the busyout failed or 
aborted. A detailed list of the codes can be in the 
"Busyout/Release Error Codes" section of this chapter.

 
 busyout tdm port-network 1 bus a                       SPE A

                           COMMAND RESULTS

   Port    Maintenance Name  Alt. Name   Result       Error Code
   PN 01A  TDM-BUS                        PASS

 Command successfully completed