Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-177
list config software-version
8
■
Software version numbers and compatibility indexes of the software load
modules stored in system memory (RAM) and on the Mass Storage
System devices (tape).
modules stored in system memory (RAM) and on the Mass Storage
System devices (tape).
■
The dates and times when translation and announcement data were last
saved to the MSS.
saved to the MSS.
■
Information about any software update files that have been applied to the
system. See "Software Upgrade" in
system. See "Software Upgrade" in
for an explanation of software versions and compatibility
indexes.
Parameters
Output
If the tape or memory card contains a core dump file, fields for tape or memory
card data display
card data display
coredump
. When a core dump is present, all other files on the
device are marked invalid.
If the memory card cannot be read at the time the command is entered, the
relevant fields display
relevant fields display
no tape or memory card
. (This does not indicate that
the system does not recognize the presence of the device.)
Fields in the SPE-B column are blank for standard reliability systems. On high
and critical reliability systems, only fields for the active SPE are displayed unless
the
and critical reliability systems, only fields for the active SPE are displayed unless
the
long
option is specified.
UPDATE FILE Section
The top half of page 1 of the form displays information pertaining to software
field-update files (‘‘patches’’).
field-update files (‘‘patches’’).
long
Specifies display of data for both SPEs in a high or critical reliability
If not used, only data for the active SPE is shown.
If not used, only data for the active SPE is shown.
memory-resident
Specifies display of RAM-resident files only. Fields for tape data will
contain
contain
n/a
Creation (GMT)
Tape and
(GMT) Disk
Tape and
(GMT) Disk
When the update file was originally created, in Greenwich Mean
Time (GMT). Note that this is
Time (GMT). Note that this is
not
the time at which the update file
was written to the MSS device.
Old-Version
Tape and Disk
Tape and Disk
The software version for which the update was created.
Old-Identifier
Tape and Disk
Tape and Disk
Which previous update file this update file expected to find stored in
the MSS when it was applied.
the MSS when it was applied.
New-Identifier
Tape and Disk
Tape and Disk
Uniquely identifies the current update file.