Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-194

list measurements 

If the system technician presses HELP after entering "list measurements ds1", the 
following list of options is displayed:

 log      summary

If the system technician presses HELP after entering "list measurements ds1 log" 
or "list measurements ds1 summary", the following message is displayed:

 Enter board location: [cabinet(1-3)];carrier(A-E);slot(00-20),

   [’print’ or ’schedule’]

If the user enters an invalid format for a board location when entering a "list 
measurements ds1 log" or "list measurements ds1 summary" command, the 
following error message is displayed:

 "entered value" Invalid slot address for DS1 board

If the user enters a board location that is not a DS1 board location or the location 
of an unadministered DS1 when entering a "list measurements ds1 log" or "list 
measurements ds1 summary" command, the following error message is 
displayed:

 DS1 board has not been administered

If the user enters anything other than "log" or "summary" following "list 
measurements ds1", the following error message is displayed:

 "entered value" is an invalid entry; please press HELP

If the system time has not been set correctly, after entering "list measurements 
ds1 log ds1_location" or "list measurements ds1 summary ds1_location" the 
following error message is displayed:

ds1_location

The physical location of a DS1 circuit pack entered as 
cabinet-carrier-slot.

print

This will cause the report to be printed if a printer is linked to the MGR1 
terminal.

schedule

When the "schedule" option is specified, the command is validated and 
then a scheduling form is displayed to allow the technician to schedule 
execution of the command. The command is then placed in the 
command queue and is executed at the specified time. The 
information displayed by the command is sent to the system printer 
instead of the screen. Refer to the Report Scheduler and System 
Printer feature specification [2] for more details.