Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-217
list mst
8
R3:
NOTE:
In abbreviated format, the header of the Q.931 message, the cause IE (if
present) and the channel id IE (if present) are the only IEs present.
In abbreviated format, the header of the Q.931 message, the cause IE (if
present) and the channel id IE (if present) are the only IEs present.
An additional cancel byte (0xCA) may be present after the standard
ISDNBRI formatted message if the message was not sent. The cancel byte
will not be appended if the abbreviated format is selected.
ISDNBRI formatted message if the message was not sent. The cancel byte
will not be appended if the abbreviated format is selected.
0x68 - ISDN BRI level 2 uplink primitive
R1:
Message[7-10]
= Link ID
Message[11+]
= standard ISDNBRI format
Message[1]
= Port Network Number of BRI port
Message[2]
= Reserved
Message[3]
= Carrier Address of BRI port
Message[4]
= Port number of BRI port
Message[5]
= SAPI
Message[6]
= TEI
Message[7,8]
= Link ID
Message[9]
= Uplink encode
0x01 - BRI Link State
0x02 - TEI Management Message
0x03 - XID Message
0x01 - BRI Link State
0x02 - TEI Management Message
0x03 - XID Message