Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-337

save announcements 

If no options are specified, the system saves the announcement to both 
processors’ MSS devices.

If the system technician presses 

HELP 

after entering "save announcements" on a 

simplex SPE system the following message is displayed:

Entry is not required

If the system technician presses 

HELP 

after entering "save announcements" on a 

duplex SPE system the following message is displayed:

Enter [’spe-active’ or ’spe-standby’]

If the announcement data module cannot be accessed (upload/download port is 
active), the following message is displayed:

Announcement data module not available

If the announcement data module is out of service, the following message is 
displayed:

Announcement data module out of service

If one or more of the announcement ports are in use, the following message is 
displayed:

Announcement port in use; please try later

If there are no announcements on the announcement board, the following 
message is displayed:

No announcements on board

If the announcement data module is not administered, the following message is 
displayed:

Required announcement data module not administered

spe-active

This option forces the system to write the announcement data to the 
specified device in the currently active processor.

spe-standby

This forces the system to write the announcement data to the specified 
device in the standby processor.