Lucent Technologies R5SI Manual Do Utilizador
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-379
status attendant
8
Console number invalid
If the console number is not administered, the following error message will be
displayed:
displayed:
Console number not assigned
If a software fault is encountered while the command is executing, the following
message will be displayed:
message will be displayed:
Error encountered, can’t complete request
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message will be displayed:
the user to restart the command, then the following message will be displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message will be displayed:
following message will be displayed:
All maintenance resources busy; try again later
Output
For the following output example, the command that was entered is "status
attendant 1."
attendant 1."
Console Number
The specific number assigned to the attendant (1-16).
Port
The port location of the attendant
(cabinet-carrier-slot-circuit).
(cabinet-carrier-slot-circuit).
Service State
In-service/idle, in-service/active, out of service, or
disconnected.
disconnected.
Usage State
Idle or active.
Maintenance Busy State
Whether maintenance is testing the object.
Connected Ports
Port locations to which the attendant is communicating
(cabinet-carrier-slot-circuit).
(cabinet-carrier-slot-circuit).