Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-623

test modem-pool 

If the group is not administered or is administered but with no members, the 
following message will be displayed:

Group not assigned, or group

assigned but with no member

If the a member is assigned, but the port is does not exist in the system, then the 
following message is displayed:

Port not assigned

If there are no tests found for the maintenance object, the following message will 
be displayed:

No tests for this MO

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

The responses will be displayed on a test-by-test basis with one line of data 
displayed for each test result.

Port

The port address (cabinet-carrier-slot-circuit) of the maintenance 
object that is being tested.

Maintenance Name

The type of maintenance object that is being tested. This is 
always MODEM-PT.

Alt. Name

This field is not applicable to this command.

Test No

The actual test that is being executed.

Result

The result of the individual test -"PASS," "ABORT," "FAIL," "NO 
BOARD," "DISABLED," "EXTRA BD."

Error Code

A system-generated number that tells why the release failed or 
aborted. A detailed list of the codes according to "Test No." is 
provided for each MO.