Lucent Technologies R5SI Manual Do Utilizador

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-666

test station 

If the EPN on which the port resides is not accessible, the following message will 
be displayed:

EPN is not available

If the extension is not administered, the following message will be displayed:

Extension not assigned

If the object associated with the specified extension is not a station, the following 
message will be displayed:

Extension exists but assigned to a different object

If the board that contains the port is not inserted in the system, the following 
message will be displayed:

Board not assigned

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

The responses will be displayed on a test-by-test basis with one line of data 
displayed for each test result.

Port

The port address (cabinet-carrier-slot-circuit) of the maintenance 
object that is being tested.

Maintenance Name

The type of maintenance object that is being tested.

Alt. Name

The alternate means of identifying the maintenance object. This 
field contains the extension when the object is a station.