Polycom 3725-23487-003/A Manual Do Utilizador

User’s Guide for the Polycom Mobile Responder

2 - 6

The Mobile Responder comes standard with an IP network interface. If you 

want to connect to another network interface, such as ISDN QBRI, ISDN PRI, 
or a serial network interface (V.35, RS-530, or RS-449), you must order the 

optional network module, install it, and then configure the new network 

interface. 
You can continue to use IP with any of the optional network modules; 

however, you cannot use more than one optional network module at the same 

time. For example, you cannot use QBRI and V.35 at the same time.

Make sure that the power is off.

Camera 1 Control 
and Camera 1 In 

Connect to an external camera, such as a Polycom 
PowerCam or PowerCam Plus. Alternatively, you can 
use the Camera 1 In connector to connect video from 
a VCR or DVD player.
If you connect an external NTSC camera to the 
Camera 1 In connector, the Mobile Responder’s 
internal camera remains activated. However, if you 
connect an external PAL camera to the Camera 1 In 
connector, the internal camera is deactivated and the 
screen turns blue. For information on how to proceed 
once you have connected an external PAL camera, 
refer to page 

. 

LAN 

Connect to an IP network.

Conference-Link 

Connect to an external digital microphone, such as a 
Polycom VSX microphone array or a SoundStation 
VTX 1000 conference phone.
Because the internal microphone does not send 
stereo audio, you must connect an external digital 
microphone if you want to send stereo audio.
If you connect a device to the Conference-Link 
connector, the Mobile Responder’s internal 
microphone remains activated. 

1

1