DFI G586OPC Manual Do Utilizador

This chapter summarizes the steps in installing the
G586OPC system board into your system unit. It also
includes a description of the area in which you must
work and directions for memory installation. Before
installing the system board, obtain the memory you plan
to install. Please refer to the memory chart, on pages 8
and 9, for the number and type of SIM modules
needed for the amount of memory you require.

Before unpacking the system board, make sure the
location you have selected is relatively free of dust and
static electricity. Excessive exposure to dust, static
electricity, direct sunlight, excessive humidity, extreme
cold, and water can damage the operational capabilities
of your system board. Avoid placing the unit on surfaces
such as carpeted floors. These areas attract static elec-
tricity which can damage some circuits on your system
board.

Make sure the power source has a properly grounded,
three-pronged socket. It is essential that the power
connection be properly grounded for correct functioning
of your system board. For further protection, we recom-
mend that you use a surge suppressor. This will protect
the system board from damage that may result from a
power surge on the electrical line.

Move items that generate magnetic fields away from
your system board, since magnetic fields can also
damage your system board. Once you have selected the