Emerson MVME7100 Manual Do Utilizador
MVME7100 Single Board Computer Installation and Use (6806800E08A)
Controls, LEDs, and Connectors
Connectors
50
3.3.3
Connectors
This section describes the pin assignments and signals for the connectors on the MVME7100.
The next table lists the standard connectors on the MVME7100 baseboard. Refer to
The next table lists the standard connectors on the MVME7100 baseboard. Refer to
Figure 3-1
on page 47
for connector locations. Pin assignments for the connectors are in the following
sections. Some connectors use standard pin assignments in compliance with the VMEbus,
IEEE, PCI, and ANSI/VITA specifications. Links to these specifications are located at
IEEE, PCI, and ANSI/VITA specifications. Links to these specifications are located at
Appendix
B, Related Specifications, on page 103
.
Table 3-2 Baseboard Connectors
Reference
Designator
Designator
Function
Notes
J6
XMC Expansion
8X PCI-E to XMCSpan
J4A
TSEC 1, 10/100/1000 Ethernet
RJ-45
J4B
TSEC 2, 10/100/1000 Ethernet
RJ-45
J11, J12, J13, J14
J21, J22, J23
PMC1
PMC2
Implementing all recommended and
optional VITA32 signals except
RESETOUT#
optional VITA32 signals except
RESETOUT#
J1
Port 0. Serial Port 1
Mini DB-9 console serial port
P1
VME five-row P1
P2
VME five-row P2 on SBC and
RTM
RTM
TSEC3 signals assigned to E1-1 thru
E1-4
E1-4
TSEC4 signals assigned to E2-1 thru
E2-4
E2-4
Serial ports 2-5
J2
USB
Single channel upright USB connector.
USB1 on front
P4
Processor COP header
P5
Boundary Scan header