Honeywell HMLCD19 Manual Do Utilizador

Rev. A 

 

4 

HMMU000882 

  

04/09/04 

 
NOTES: 

Rev. A 

 

9 

HMMU000882 

  

04/09/04 

 

The microcontroller has memory capacity to store 27 different 

display modes including timing formats and display settings.  
This memory capacity is divided into two parts:  user setting 
area and factory presetting area. 

 

The user can add non-standard modes.  If display image is 
adjusted, the image is saved automatically, then when the 
microcontroller is turned on it detects and displays the last 
mode stored in the user setting area.  The user setting area 

maintains the last 10 display modes set by the user in its 
memory.  When the user setting area is full (6 modes are 
registered), if new non-standard timing is registered, the oldest 
timing settings will be deleted. 

 

There are 17 display modes stored in the Factory Presetting 
Area.  The display modes are preset at the factory and include 
most of the display modes currently available (see Timing Chart).  
Factory Preset Mode can also be retrieved by selecting the 

RECALL menu. 

 

The monitor automatically saves the setting value 20 seconds 

after adjusting the OSD menu.