ASUS TR-DLS Manual Do Utilizador
ASUS TR-DLS User’s Manual
25
3. HARDWARE SETUP
3.6
Central Processing Unit (CPU)
The motherboard comes with a dual Socket 370 for Intel Pentium III Coppermine
(256KB L2) and Tualatin (512KB L2) CPUs running up to 1.53+GHz with 100/
133MHz Front Side Bus (FSB). The following illustration shows the location of the
CPU sockets on the motherboard and the correct CPU and terminator orientation.
(256KB L2) and Tualatin (512KB L2) CPUs running up to 1.53+GHz with 100/
133MHz Front Side Bus (FSB). The following illustration shows the location of the
CPU sockets on the motherboard and the correct CPU and terminator orientation.
Note in the illustration that the CPU and the terminator have marks (usually a notch
or a gold mark on one corner) to help you identify the proper orientation and enable
you to correctly install them. It is important that you match the marked corner of the
CPU and terminator with the corresponding corner on the socket so as not to damage
the CPU pins.
or a gold mark on one corner) to help you identify the proper orientation and enable
you to correctly install them. It is important that you match the marked corner of the
CPU and terminator with the corresponding corner on the socket so as not to damage
the CPU pins.
CPU
3. H/W SETUP
NOTE: Do not forget to set the correct Bus Frequency and Multiple
(frequency multiple setting is available only on unlocked processors) for the
processor to avoid start-up problems.
(frequency multiple setting is available only on unlocked processors) for the
processor to avoid start-up problems.
TR-DLS Socket 370
TR-DLS
Gold Arrow
Pentium III
(Coppermine)
Pentium III
(Tualatin)
Gold Arrow
FC-PGA
FC-PGA2
Socket 370
Terminator
Terminator
(Use when only one
CPU is installed)
CPU is installed)
Silver Arrow