ASUS P5Q WS Manual Do Utilizador

ASUS P5Q WS

4-49

The Marvell

®

 6121 Serial ATA controller allows you to configure RAID 0 and RAID 1 

sets on the Serial ATA hard disk drives.

You must set the RAID item in the BIOS Setup before you can create a RAID 

set(s). To do this:
1.  Install two Serial ATA hard disk drives to the eSATA connectors on the rear 

panel.

2.   Boot up your computer, and press <Del> during POST to enter the BIOS 

setup. 

3.  In the Advanced Menu, go to Onboard Devices Configuration, and set 

Marvell IDE/eSATA to [RAID Mode].

3.  Press <F10> to save the changes and exit.

The RAID BIOS setup screens shown in this section are for reference only, and 

may not exactly match the items on your screen.