ASUS M2N DH Manual Do Utilizador

5-16

Chapter 5: Software support

A floppy disk with the RAID driver is required when installing Windows

®

 2000/XP 

operating system on a hard disk drive that is included in a RAID set. 
To create a RAID driver disk:
1.  Place the motherboard support CD into the CD-ROM drive.
2.   Select Make Disk tab.
3.  From the Make Disk menu, select the RAID driver disk you want to create or 

browse the contents of the support CD to locate the driver disk utility. 

Refer to section “5.2.4 Make Disk menu” for details.

4.   Insert floppy disk to floppy disk drive.
5.   Follow succeeding screen information to complete process.
6.  Write-protect the floppy disk to avoid computer virus infection.

To install the RAID driver:
1.  During the OS installation, the system prompts you to press the F6 key to 

install third-party SCSI or RAID driver.

2.  Press <F6> then insert the floppy disk with RAID driver into the floppy disk 

drive.

3.  Follow the succeeding screen instructions to complete the installation.

Due to chipset limitation, the Serial ATA ports supported by the NVIDIA chipset 

doesn’t support Serial Optical Disk Drives (Serial ODD) under DOS.