Advantech PCA-6185 Manual Do Utilizador
71
Chapter 7
tems. Run SCSISelect if you need to change or view
current settings, or if you would like to run the SCSI
disk utilities.
SCSI Select Options
Available Settings
Default Settings
SCSI Bus Interface
Definitions:
Host Adapter SCSI ID
Definitions:
Host Adapter SCSI ID
0-15
7
SCSI Parity Checking
Enable, Disabled
Enabled
Host Adapter SCSI Termination
LVD/SE Connectors
LVD/SE Connectors
Automatic
Automatic
Enabled
Disabled
Disabled
SE Connectors
Automatic
Automatic
Low On/High On
Low Off/High Off
Low Off/High On
Low Off/High Off
Low Off/High On
Boot Device Options:
Boot SCSI ID
Boot SCSI ID
0-15
0
Boot LUN Number
1
0-7
0
SCSISelect Options
Available Settings
Default Setting
SCSI Device Configuration:
Sync Transfer Rate (MBytes/
sec)
Sync Transfer Rate (MBytes/
sec)
320, 160, 80.0, 53.4,
40.0, 32.0, 26.8,20.0,
16.0, 13.4, 10.0
ASYN
40.0, 32.0, 26.8,20.0,
16.0, 13.4, 10.0
ASYN
320
Initiate Wide Negotiation
Yes, No
Yes (enabled)
Enable Disconnection
Yes, No
Yes (enabled)
Send Start Unit Command
Yes, No
Yes (enabled)
Enable Write Back Cache
2
N/C (No Change),
Yes, No
Yes, No
N/C (No Change)
BIOS Multiple LUN Support
2
Yes, No
No (disabled)
Include in BIOS Scan
2
Yes, No
Yes (enabled)
Advanced Configuration
Options:
Reset SCSI Bus at IC Initializa-
tion
Options:
Reset SCSI Bus at IC Initializa-
tion
Enabled, Disabled
Enabled
Display <Ctrl><A> Messages
during BIOS Initialization
during BIOS Initialization
Enabled, Disabled
Enabled
Extended BIOS Translation for
DOS Drives > 1 GByte
DOS Drives > 1 GByte
Enabled, Disabled
Enabled
Verbose/Silent Mode
Verbose, Silent
Verbose
Host Adapter BIOS
Enabled,
Disabled : Not Scan
Disabled : Scan bus
Disabled : Not Scan
Disabled : Scan bus
Enabled
Domain Validation
2
Enabled, Disabled
Enabled