Advantech PCM-9588 Manual Do Utilizador

PCM-9588 User Manual

24

!

!

When enabled, the BIOS will seek the floppy “A” drive one time.

!

This item enables users to activate the Number Lock function upon system
boot.

!

This item enables users to activate the Number Lock function upon system boot

!

This item enables users to switch A20 control by port 92 or not.

!

This item enables users to set the two typematic controls items.
This field controls the speed at 

–

Typematic Rate (Chars/Sec)

This item controls the speed at which the system auto-repeats keystrokes. 
Eight settings are 6, 8, 10, 12, 15, 20, 24 and 30.

–

Typematic Delay (Msec)

This item sets the keypress time interval before auto-repeat begins. The
delay rate options are 250, 500, 750 and 1000.

!

!

This item allows user to enabled of disabled "Advanced Programmable Interrupt
Controller". APIC is implemented in the motherboard and must be supported by
the operating system, and it extends the number of IRQ's available.

!

This item sets the operating system multiprocessor support version.

!

Select OS2 only if system is running OS/2 operation system with greater than
64 MB of RAM on the system.

Floppy

 Assign this boot device priority to  Floppy.

LS120

 Assign this boot device priority to  LS120.

Hard Disk

 Assign this boot device priority to  Hard Disk.

CDROM 

 Assign this boot device priority to  CDROM.

ZIP

 Assign this boot device priority to  ZIP.

USB-FDD

 Assign this boot device priority to  USB-FDD.

USB-ZIP

 Assign this boot device priority to  USB-ZIP.

USB-CDROM 

 Assign this boot device priority to  USB-CDROM.

USB-HDD

 Assign this boot device priority to  USB-HDD.

LAN

 Assign this boot device priority to  LAN.

Disabled

 Disable this boot function.

System

System requires password both for bootup and for access to the 
Setup page..

Setup 

System requires password only for access to the Setup page, not for 
bootup. (Default value)