AMCC 9590SE-4ME Manual Do Utilizador
Enclosure Object Commands
www.3ware.com
81
/e
x
show fans
This command lists the fans in enclosure /ex and shows their status. Possible
statuses are OK and Unknown.
statuses are OK and Unknown.
Example:
//localhost> /e0 show fans
Fan Status
----------------------
fan0 OK
/e
x
show temp
This command lists the temperature sensors in enclosure /ex and the current
temperature.
temperature.
The maximum temperature for successful use of a drive should be noted in the
documentation for the drive.
documentation for the drive.
Example:
//localhost> /e0 show temp
TempSensor Temperature
-------------------------------
temp0 24~C(75~F)
/e
x
show all
This command shows the current settings of all attributes for enclosure /ex.
/e
x
/slot
x
show
This command shows information about the specified /slotx on the specified
enclosure /ex. The slot name is followed by its status. If a slot has been
inserted with a drive and no fault has been detected, the status is OK. If the
slot is empty the status would indicate NO-DEVICE. The port that is
correlated to the slot is indicated in the next column. If no device is found in
the slot, that is indicated with a dash (-) in the Port column. The final column
shows whether “identify” is currently set for the specified slot.
enclosure /ex. The slot name is followed by its status. If a slot has been
inserted with a drive and no fault has been detected, the status is OK. If the
slot is empty the status would indicate NO-DEVICE. The port that is
correlated to the slot is indicated in the next column. If no device is found in
the slot, that is indicated with a dash (-) in the Port column. The final column
shows whether “identify” is currently set for the specified slot.
Example:
//localhost> /e0/slot1 show
Slot Status Port Identify
----------------------------------------------------
slot1 OK /c0/p1 Yes